FAQ

The frequency of generator service varies depending on the type and usage of the generator, as well as the manufacturer's recommendations. Here are some general guidelines:

  1. Standby generators: Standby generators that are used for emergency backup power should be serviced at least once a year, before the start of the hurricane or storm season.
  2. Portable generators: Portable generators that are used for outdoor activities or construction sites should be serviced every 50 hours of operation or at least once a year.
  3. Continuous-use generators: Generators that are used for continuous power supply, such as in a data center, should be serviced every 100 hours of operation or at least twice a year.

Generators can experience a variety of problems, some of the most common include:

  1. Fuel-related issues: Fuel-related problems, such as a clogged fuel filter, low fuel levels, or stale fuel, can cause a generator to stop running.
  2. Electrical issues: Electrical problems, such as a damaged alternator, a failing voltage regulator, or worn-out spark plugs, can cause the generator to run poorly or not start at all.
  3. Engine problems: Engine problems, such as a seized engine, a failing oil pump, or a worn-out cylinder, can cause the generator to stop running or run poorly.
  4. Cooling system problems: Cooling system problems, such as a clogged radiator, a failing water pump, or low coolant levels, can cause the generator to overheat and stop running.
  5. Exhaust system problems: Exhaust system problems, such as a clogged muffler or a damaged exhaust pipe, can cause the generator to run poorly and emit dangerous fumes.
  6. Control panel issues: Control panel issues, such as a faulty circuit breaker or a damaged control panel, can cause the generator to stop running or run poorly.
  7. Starting problems: Starting problems, such as a dead battery or a failing starter, can prevent the generator from starting.

Diesel generators can experience a variety of problems, some of the most common include:

  1. Fuel system issues: Fuel system issues, such as clogged fuel filters, air in the fuel line, or contaminated fuel, can cause the generator to run poorly or not start at all.
  2. Engine problems: Engine problems, such as low compression, worn-out pistons, or a damaged turbocharger, can cause the generator to run poorly or stop running.
  3. Cooling system problems: Cooling system problems, such as a clogged radiator, a failing water pump, or low coolant levels, can cause the generator to overheat and stop running.
  4. Exhaust system problems: Exhaust system problems, such as a clogged muffler or a damaged exhaust pipe, can cause the generator to run poorly and emit dangerous fumes.
  5. Electrical issues: Electrical issues, such as a damaged alternator, a failing voltage regulator, or worn-out spark plugs, can cause the generator to run poorly or not start at all.
  6. Starting problems: Starting problems, such as a dead battery or a failing starter, can prevent the generator from starting.
  7. Control panel issues: Control panel issues, such as a faulty circuit breaker or a damaged control panel, can cause the generator to stop running or run poorly.

The best generator for home use depends on the specific needs and requirements of the user. Here are some factors to consider when choosing a generator for home use:

  1. Power output: The generator should be able to meet the total power requirements of the home, including essential appliances, lights, and air conditioning.
  2. Fuel type: Consider the availability and cost of fuel in your area when choosing between a gasoline, propane, or diesel generator.
  3. Noise level: Home generators should have a low noise level, especially if they will be used in residential areas.
  4. Portability: Consider a portable generator if you need to take it to different locations or need to move it around the house.
  5. Brand reputation: Choose a reputable brand with a good track record for reliability, quality, and customer service.

The size of the generator you need for your house depends on the total power requirements of your home, including essential appliances, lights, and air conditioning. Here's how to determine the size of generator you need:

  1. Identify essential appliances: Make a list of the essential appliances and electronics you need to power during an outage, such as a refrigerator, lights, and a sump pump.
  2. Determine the power requirements: Check the power requirements for each appliance, usually measured in watts. Add up the total watts required for all essential appliances to determine your total power requirement.
  3. Consider peak power demand: Consider the peak power demand of your home, which is the maximum power required by your appliances at any given time. This is important as some appliances, like air conditioners, require a large amount of power when starting up.
  4. Factor in safety margins: Add a safety margin of 20-30% to your total power requirement to ensure that your generator can handle sudden spikes in demand.

    Based on your total power requirement, you can choose a generator with a corresponding output capacity. For example, a home with a total power requirement of 4,000 watts would require a generator with an output capacity of 4,000 to 5,000 watts.

    It's important to consult with a professional like Casablanca Generators and perform a load calculation to determine the exact size of generator you need for your home, as factors such as the age of your appliances and the altitude of your location can impact your power requirements.

The length of time a generator can run depends on several factors, including:

  1. Fuel type: The type of fuel used, such as gasoline, propane, or diesel, will affect the generator's run time.
  2. Fuel tank capacity: The size of the fuel tank will determine the amount of fuel available, which will in turn determine the generator's run time.
  3. Load demand: The total power demand of the appliances and equipment connected to the generator will impact its run time. The higher the demand, the faster the generator will consume fuel.
  4. Engine efficiency: The efficiency of the generator's engine will impact its fuel consumption rate, which will in turn determine its run time.

    In general, a portable generator with a full tank of gasoline and a moderate load demand can run for 8-12 hours. A larger standby generator, with a larger fuel tank and a lower load demand, can run for several days without refueling. It's important to regularly check the fuel level and perform routine maintenance to ensure that your generator is operating efficiently and to extend its run time.

Here are some common maintenance tasks that are required for a generator:

  1. Fuel system maintenance: This includes cleaning or replacing fuel filters, checking the fuel system for leaks, and ensuring that the fuel tank is properly sealed.
  2. Engine oil and oil filter changes: Regular oil changes and oil filter replacements are important to ensure that the engine is lubricated properly and to extend its lifespan.
  3. Cooling system maintenance: This includes checking the coolant levels, cleaning or replacing the coolant, and checking the radiator and hoses for leaks.
  4. Spark plug replacement: Spark plugs should be checked and replaced as needed to ensure efficient combustion and prevent engine misfires.
  5. Battery maintenance: This includes checking the battery voltage and charging system, cleaning the battery terminals, and ensuring that the battery is properly secured.
  6. Generator load testing: Regular load testing is important to ensure that the generator is operating efficiently and can handle the demands of your home or business.
  7. Air filter replacement: Air filters should be checked regularly and replaced as needed to ensure that the engine is receiving adequate air flow.
  8. Generator cleaning: Regular cleaning is important to remove debris and dust, which can impact the generator's performance and efficiency.

    It's important to consult the manufacturer's recommendations for the specific type of generator you have, as well as to have a professionals such as Casablanca Generators perform annual maintenance to ensure that your generator is operating safely and efficiently.

The number of watts you need to power a house in the UAE depends on several factors, including the size of your home, the number of appliances and electronics you have, and the type of lighting you use.

As a rough estimate, the average home in the UAE uses between 5,000 and 8,000 kilowatt-hours (kWh) of electricity per month, or between 500 and 800 kilowatts (kW) per hour. However, this can vary widely based on your personal habits and usage patterns.

Kubota, John Deere, Cummins and Perkins are some of the major brands of generators in Dubai. Casablanca Generators deals in all these major electrical generators in Dubai.